From approximately the earlier years of the 1770s separate parts of a vessel such as spouts or lids were stamped out using a drop-hammer. The piece of Sheffield plate would be placed upon a striking block which had a die sunk with a model of the required shape. Then the hammer, the face of which was raised with the same shape as the sunken die, was manipulated from above by a rope between two vertical rods and, as it struck the block, the Sheffield plate was stamped into shape. The parts would then be soldered to the vessel. The introduction of harder steels made possible more sharply-defined pieces and during the Regency period entire units were produced in this manner. Die-stamping was a very important technique, advances in it contributing greatly to mass-production methods in both silver and Sheffield plate. By the last decade of the eighteenth century larger, flat pieces such as trays were being produced in this manner, suitably ornamented as already described. (more…)

A knife and fork may seem the perfect combination by modern standards, but before forks came into general use the knife and the spoon were the two vital, complementary utensils which served the needs at table. While eighteenth century examples of knives with handles of cast silver are available at a very high cost, the expense involved in making these in the heavier-gauge silver means that most eighteenth century examples available today are of the thinner silver produced at the end of the century.

Forks were used increasingly in England after the Restoration. The Victoria and Albert Museum, London, has a two-pronged fork made in 1632, one of the oldest silver table forks, but this is a very rare example. (more…)

Electro-plate produced during the nineteenth century may become as collectable as certain other pieces of Victoriana, and for the beginner in particular it has several other things to commend it. At the moment it is usually very reasonably priced. It is also interesting since it reflects the amazing conglomeration of styles which jockeyed with each other for a place of supremacy in Victorian fashion. Also, although the age of mass-production had established itself, some of the hand techniques used in the making of Sheffield plate or sterling silver wares were retained and used for some years on their electro-plated counterparts. The colour of early electro-plate, although not comparable with sterling silver or Sheffield plate, is also far more mellow than the harsh tones of modern electro-plate. Certain examples, particularly teapots and coffee pots, were quite robust considering their low cost then and now, and in some cases might even be described as sturdy compared with the lightweight objects produced today. (more…)

A few years after the turn of the eighteenth century the spoon eventually developed into the utensil which we use today. By 1720 its stem had become gracefully curved and terminated in a flat, rounded end which turned forward or upward and upon which it was rested on the table, so that the back of the bowl was uppermost in the French way. This Hanoverian rat-tail spoon continued in fashion for a few more years, the rat-tail gradually disappearing to be replaced by small droplets, either one or two, at the back of the bowl, or the increasingly fashionable scallop-shell, typical of the rococo period. The stem evolved into a flatter form, terminating by the 1760s in a curve which turned in the opposite direction to its predecessor, ie backward instead of forward, so that the spoon could be placed on the table with the interior of its bowl showing,as is still the custom in England and elsewhere today. This is termed the `Old English’ pattern and has been the basic form for spoons ever since. (more…)

It always seems a pity that the tea kettle is no longer required in the making of tea, and indeed has not been for generations since it was succeeded by the tea urn during the last 25 years or so of the eighteenth century, for it was among the most magnificent of all rococo domestic silver. Its introduction was born of the necessity for a constant supply of hot water to replenish the tiny Queen Anne teapots already discussed. The brewing of tea was a fashionable ritual in those distant days, the mistress of the house attending to it herself usually in the drawing roomor salon.

Early tea kettles were extremely plain and homely vessels, and their. rotund shape was similar to that of the pear-shaped teapot. Likewise their spouts were of the swan-neck variety, and their lids usually topped with a wooden knop. Handles were of the swing type with wooden grips, but these varied. (more…)

Tea was a precious commodity because of its high cost, and the very small size of early canisters reflected this when they were introduced during the final years of the seventeenth century. It is thought that the shape of the early silver tea canister imitated the shape of the Oriental stoppered jars of porcelain then being imported, because they looked rather like metal jars with a flat, rectangular base, and undecorated straight sides which curved in at the shoulders to a circular neck fitted with a slip-on, rounded cap. A late seventeenth century example might be only three inches high, but by Queen Anne’s reign they were generally taller. (more…)

For many years tea was commonly drunk clear in the Chinese fashion and because of this and other reasons it is difficult to find a jug made earlier than the first few years of the eighteenth century. Early examples are in the pyriform shape, with a scrolled handle, sometimes positioned at a right-angle to the lip or spout. Diminutive cream jugs, standing no more than three inches high, were generally left undecorated, though others might have two rows of moulding at their waist. Both were made of a thick gauge metal and were weighty, despite their small size. In time the jug became more general, hammered up from the flat, with the cast spout and handle now opposite each other, standing upon a spreading moulded foot, and still with attractive scroll handles. (more…)

Early pierced baskets were heavy, magnificent pieces but these are rare. Eighteenth century examples were oval, rectangular or circular with a flat base and ornately-pierced sides, often featuring two small cabled silver handles which were later superseded by the swing type. Huguenot silversmiths were much acclaimed for their fine pierced and embossed baskets, and superb examples of their work, which clearly show why they were so admired, can be seen in various stately homes and museums.

However, some of their achievement must also be attributed to the English invention of the rolling-mill which had been improved by 1728, allowing the production of a fine gauge silver for more complicated piercing. (more…)

Few basic changes have been made to the salt cellar since the eighteenth century, and even those produced today in sterling silver or electro-plate are usually exact, or very close, copies of their predecessors. From time to time, of course, designers have endeavoured to break away from

established forms, and the Victoria and Albert Museum, London, has a superb Art Nouveau specimen in parcel-gilt by C. R. Ashbee which incorporates amber and a small figure, the latter being characteristic of Ashbee’s work, but this ‘salt‘ would be considered too ornate for general use. An interesting example of 1866 by Stephen Smith was of frosted silver with figures of sowers and men carrying baskets of seeds upon their backs. (more…)

Monteiths, punch bowls and punch ladles

The monteith, which looks like a punch bowl with an ornate rim arid lifting handles, fir ^whist appeared some 20 years after the Restoration but became more general during the later years of the seventeenth century and earlier years of the eighteenth. Monteiths are comparatively rare pieces, and therefore fetch high prices. Their scalloped and notched rims were generally removable. The monteith was filld with cold water, then glasses were hung by their foot upon the notchese, and thus allowed to cool in the water. When the monteith was not being used in l filled it punch. (more…)